- info@autronx.com
- +91 9642 702 233
- Mon to Sat: 09:00 am to 06:00 pm
AU-XSSL
Smart, Energy Saving Detection for your spaces
AU-XSSL
The AutronX AU-XSSL is a smart surface-mounted light designed for efficient and automated indoor lighting. Featuring motion detection and dimming capabilities, it ensures hands-free operation with optimised energy consumption.
Operating at 15W with a luminous efficacy of 120 lumens per watt, the light dims down to 3.6W in inactive mode. Its compact design and self-installation capability make it ideal for homes, offices, and common indoor areas.
Smart Motion Detection with Dimming
Switches ON with motion, dims to 30% brightness after inactivity for efficient lighting control.
Energy Efficient & Long Lasting
Provides 120 lumens per watt and ensures over 35,000+ burning hours for long-term use.
Surface Mount Installation
Simple self-installation with a sleek surface-mounted design for modern interiors.
Technical Specifications
| Model | AU-XSSL |
|---|---|
| Power Source | 220–240V AC, 50/60Hz |
| Wattage | 15W |
| Power Consumption | 15W (Bright), 3.6W (Dim) |
| Lighting Output | 120 lumens/Watt |
| Detection Range | Up to 6m |
| Installation Type | Surface Mount & Self Installation |
| Color Temperature | 3000K / 4000K / 6500K |
| Beam Angle | 150° |
| Sensor Type | On-Off & Dimmable |
| Power Factor | <0.98 |
| Efficiency | >90% at Full Brightness |
| THD | <15% at Full Brightness |
| Burning Hours | 35,000+ Hours |
| IP Rating | IP20 |
Key Functional Modes
On-Off Mode
Activates when motion is detected- Light switches ON with movement
- Turns OFF after 30 seconds of no motion
- Provides hands-free lighting automation
Dimming Mode
Maintains low brightness after inactivity- Full brightness on motion detection
- Dims to 30% after 30 seconds of no movement
- Enhances energy efficiency in low-traffic areas
Memory Function Mode
Remembers last settings after power outages- Restores last used mode after power restoration
- Ensures consistent operation without manual reset
- Convenient for residential and office use
Installation Guide
- Power Off: Disconnect power supply before starting installation.
- Mounting: Fix the surface light securely to the ceiling or wall using supplied fixtures.
- Wiring: Connect input power wires as per diagram ensuring correct polarity.
- Test Functionality: Power on and verify motion detection and dimming modes.